| Priming Issues | |
|
+5gamewizard Fulminata Wildeyedjester bsimon DEATHWATCH CONUNDRUM 9 posters |
|
Author | Message |
---|
DEATHWATCH CONUNDRUM Lesser Daemon with visions of grandeur
Posts : 166 Join date : 2010-04-25
| Subject: Re: Priming Issues 1st June 2010, 3:05 am | |
| - RetroPengo wrote:
- Pine Sol mixed with water in a 50/50 solution will not harm plastic models for up to 8 hours of soak time. possibly 12 based on what I've read. I had it work perfectly on 2 metal models though at full concentration.
50/50 pine sol/water will get cloudy-white for a little while. It's just what pine sol does in water. After 8 - 12 hours it will start softening up the plastic though.
Also, get super cheap brushes. I had to use 3 as they actually became caked with the old paint and wouldn't scrub any more off. I may be left to a 50/50 shot if the second soak doesn't work?!?!?!? | |
|
| |
gamewizard Castle House Games Manager
Posts : 954 Join date : 2009-06-16
| Subject: Re: Priming Issues 1st June 2010, 3:15 am | |
| From what you showed me, I think you are fine. At this point, reprime and see how a few minis look.
Keep it in perspective, it's your first attempt. Everyone learns by mistakes. | |
|
| |
RetroPengo Chaplain and a book full of sermons
Posts : 263 Join date : 2010-02-25
| Subject: Re: Priming Issues 1st June 2010, 3:25 am | |
| I concur. your models looked good to go. Use Army Painter. | |
|
| |
DEATHWATCH CONUNDRUM Lesser Daemon with visions of grandeur
Posts : 166 Join date : 2010-04-25
| Subject: Re: Priming Issues 1st June 2010, 7:31 am | |
| - RetroPengo wrote:
- I concur. your models looked good to go.
Use Army Painter. Thanks guys. Since you've both seen them I trust you. | |
|
| |
RetroPengo Chaplain and a book full of sermons
Posts : 263 Join date : 2010-02-25
| Subject: Re: Priming Issues 1st June 2010, 12:41 pm | |
| I would be happy to show you a good way to use your primer. Let me know a time and place that works for you. I'm a fair hand with army painter at this point or if you want to use something cheaper, you certainly can. | |
|
| |
bsimon Chaos Daemon Prince
Posts : 540 Join date : 2009-06-10
| Subject: Re: Priming Issues 1st June 2010, 7:18 pm | |
| Results from <24 hours in the stripper: no paint on the plastic at all.
It actually started working in under 2 hours, but I was in a rush this morning and didn't check.
Is there anything else you did? Straight GW primer, acrylic, no Purity Seal or anything? | |
|
| |
DEATHWATCH CONUNDRUM Lesser Daemon with visions of grandeur
Posts : 166 Join date : 2010-04-25 Age : 44 Location : Fayettenam
| Subject: Re: Priming Issues 1st June 2010, 7:59 pm | |
| - bsimon wrote:
- Results from <24 hours in the stripper: no paint on the plastic at all.
It actually started working in under 2 hours, but I was in a rush this morning and didn't check.
Is there anything else you did? Straight GW primer, acrylic, no Purity Seal or anything? Straight GW Primer. | |
|
| |
bsimon Chaos Daemon Prince
Posts : 540 Join date : 2009-06-10
| Subject: Re: Priming Issues 1st June 2010, 8:07 pm | |
| Completely at a loss. I don't have any GW primer anymore, but I don't recall it taking anything unusual to strip off. I bought the exact same thing you did and have no issues... | |
|
| |
DEATHWATCH CONUNDRUM Lesser Daemon with visions of grandeur
Posts : 166 Join date : 2010-04-25 Age : 44 Location : Fayettenam
| Subject: Re: Priming Issues 1st June 2010, 9:11 pm | |
| - bsimon wrote:
- Completely at a loss. I don't have any GW primer anymore, but I don't recall it taking anything unusual to strip off. I bought the exact same thing you did and have no issues...
So are you saying that over 24 hours the paint just fell off? No scrubbing involved? | |
|
| |
bsimon Chaos Daemon Prince
Posts : 540 Join date : 2009-06-10
| Subject: Re: Priming Issues 1st June 2010, 9:21 pm | |
| I swirled the container twice last night. Other than that I only rinsed under the faucet. That wad mostly to get residue off. No scrubbing at all. | |
|
| |
gamewizard Castle House Games Manager
Posts : 954 Join date : 2009-06-16 Age : 62 Location : Springdale, Fayetteville
| Subject: Re: Priming Issues 2nd June 2010, 1:20 am | |
| I do this very same procedure in order to clean my teeth.
Just a few swirls and everything falls off. | |
|
| |
DEATHWATCH CONUNDRUM Lesser Daemon with visions of grandeur
Posts : 166 Join date : 2010-04-25 Age : 44 Location : Fayettenam
| Subject: Re: Priming Issues 2nd June 2010, 7:10 am | |
| - bsimon wrote:
- I swirled the container twice last night. Other than that I only rinsed under the faucet. That wad mostly to get residue off. No scrubbing at all.
Wow your powers are amazing...............I'm speechless...... | |
|
| |
RetroPengo Chaplain and a book full of sermons
Posts : 263 Join date : 2010-02-25
| Subject: Re: Priming Issues 2nd June 2010, 7:13 am | |
| What did it just fall off with? I used pine sol and I had to scrub and scrub and I ruined 3 toothbrushes with paint gunk and still barely got it all off. If I could just get it to fall off that would be awesome.
Maybe thats the limitation of pine sol. | |
|
| |
gamewizard Castle House Games Manager
Posts : 954 Join date : 2009-06-16 Age : 62 Location : Springdale, Fayetteville
| Subject: Re: Priming Issues 2nd June 2010, 2:23 pm | |
| You weren't holding your teeth right.
If you grit them just right and squeeze your cheeks; everything will just ooze right off.
No. no. Not those cheeks. Your other cheeks. | |
|
| |
RetroPengo Chaplain and a book full of sermons
Posts : 263 Join date : 2010-02-25
| Subject: Re: Priming Issues 2nd June 2010, 4:02 pm | |
| Yikes! Hoisted by my own petard. | |
|
| |
bsimon Chaos Daemon Prince
Posts : 540 Join date : 2009-06-10
| Subject: Re: Priming Issues 3rd June 2010, 9:47 pm | |
| If you'll be at Patriot Games Saturday, I'll bring by a crap model. If you'll undercoat it and return it Sunday, I'll try stripping it and see if it's any different. | |
|
| |
DEATHWATCH CONUNDRUM Lesser Daemon with visions of grandeur
Posts : 166 Join date : 2010-04-25 Age : 44 Location : Fayettenam
| Subject: Re: Priming Issues 3rd June 2010, 10:02 pm | |
| - bsimon wrote:
- If you'll be at Patriot Games Saturday, I'll bring by a crap model. If you'll undercoat it and return it Sunday, I'll try stripping it and see if it's any different.
Sadly I wont be able to make it to Patriot. | |
|
| |
bsimon Chaos Daemon Prince
Posts : 540 Join date : 2009-06-10
| Subject: Re: Priming Issues 11th July 2010, 9:24 pm | |
| Did you ever get this resolved? If not, drop off a model or two at CHG by next Saturday and I'll see what I can do when I'm down for the tournament. | |
|
| |
DEATHWATCH CONUNDRUM Lesser Daemon with visions of grandeur
Posts : 166 Join date : 2010-04-25 Age : 44 Location : Fayettenam
| Subject: Re: Priming Issues 11th July 2010, 10:11 pm | |
| They're coming along. Just haven't had a lot of time. Only some guns and backpacks left.
Thanks for asking. I appreciate it! | |
|
| |
Sponsored content
| Subject: Re: Priming Issues | |
| |
|
| |
| Priming Issues | |
|